X20 terminal block, 12-pin, 24 VDC keyed
NÚMERO MATERIAL:
X20BC0083
DESCRIPCIÓN:
POWERLINK
Configuración de E/S y actualización de firmware a través del bus de campo
Concentrador integrado para un cableado económico
El controlador de bus permite conectar nodos X2X Link I/O a POWERLINK. También es posible operar el ciclo X2X Link de forma síncrona 1:1 o síncrona con POWERLINK utilizando un preescalador.
POWERLINK es un protocolo estándar para Fast Ethernet equipado con características estrictas de tiempo real. El grupo de estandarización POWERLINK (EPSG) garantiza que el estándar permanezca abierto y se desarrolle continuamente: www.ethernet-powerlink.org.
Short description
Bus controller | POWERLINK (V1/V2) controlled node |
B&R ID code | 0x1F1E |
Status indicators | Module status, bus function |
Diagnostics | |
Module status | Yes, using LED status indicator and software |
Bus function | Yes, using LED status indicator and software |
Support | |
Dynamic node allocation (DNA) | Yes |
Power consumption | |
Bus | 2 W |
Additional power dissipation caused by actuators (resistive) [W] | – |
Certifications | |
CE | Yes |
UKCA | Yes |
ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user’s manual) FTZÚ 09 ATEX 0083X |
UL | cULus E115267 Industrial control equipment |
HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
DNV | Temperature: B(0 to 55°C) Humidity: B(up to 100%) Vibration: B(4 g) EMC: B(bridge and open deck) |
LR | ENV1 |
KR | Yes |
ABS | Yes |
BV | EC33B Temperature: 5 – 55°C Vibration: 4 g EMC: Bridge and open deck |
EAC | Yes |
KC | Yes |
Fieldbus | POWERLINK (V1/V2) controlled node |
Type | Type 2 |
Variant | 2x shielded RJ45 (hub) |
Line length | Max. 100 m between 2 stations (segment length) |
Transfer rate | 100 Mbit/s |
Transfer | |
Physical layer | 100BASE-TX |
Half-duplex | Yes |
Full-duplex | No |
Autonegotiation | Yes |
Auto-MDI/MDIX | Yes |
Hub propagation delay | 0.96 to 1 µs |
Min. cycle time | |
Fieldbus | 200 μs |
X2X Link | 200 μs |
Synchronization between bus systems possible | Yes |
Electrical isolation | POWERLINK isolated from bus and I/O |
Mounting orientation | |
Horizontal | Yes |
Vertical | Yes |
Installation elevation above sea level | |
0 to 2000 m | No limitation |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Degree of protection per EN 60529 | IP20 |
Temperature | |
Operation | |
Horizontal mounting orientation | -25 to 60°C |
Vertical mounting orientation | -25 to 50°C |
Derating | – |
Storage | -40 to 85°C |
Transport | -40 to 85°C |
Relative humidity | |
Operation | 5 to 95%, non-condensing |
Storage | 5 to 95%, non-condensing |
Transport | 5 to 95%, non-condensing |
Note | Order 1x terminal block X20TB12 separately. Order 1x power supply module X20PS9400 or X20PS9402 separately. Order 1x bus base X20BB80 separately. |
Pitch | 37.5+0.2mm |
X20BB80 | X20 bus base, for X20 base module (BC, HB, etc.) and X20 power supply module, X20 end cover plates (left and right) X20AC0SL1/X20AC0SR1 included |
X20PS9400 | X20 power supply module, for bus controller and internal I/O power supply X2X Link power supply |
X20PS9402 | X20 power supply module, for bus controller and internal I/O power supply, X2X Link supply, supply not galvanically isolated |
X20TB12 | X20 terminal block, 12-pin, 24 VDC keyed |
Distribuidores B&R Industrial Automation Argentina, Service Provider.
Distribuidores B&R Argentina, PLC, Service, HMi Pantallas, Drives Amplificadores B&R, reparaciones, ventas, repuestos, proveedor, Argentina.
Mas informacion?
Weight | 0,5 kg |
---|---|
Dimensions | 10 × 2,5 × 5,5 cm |