25B-D2P3N104, Allen-Bradley Drive, PowerFlex 525 0.75 kW (1.0 HP)

6 de marzo de 2023

NJ50-FP-N-P4, Pepperl+Fuchs sensor, Proximity, Inductive, 50mm Range, NAMUR

8 de marzo de 2023

8I84T401500.010-1, B&R ACOPOSinverter P74, 3x 380 to 500 V, 2.2 kW

ACOPOSinverter P74, 3x 380 to 500 V, 2.2 kW, integrated EMC filter and brake chopper, shield plate included in delivery, POWERLINK interface

SKU: 8I84T401500.010-1 Categorías: B&R, Potencia, Servos

Descripción

General information

Certifications
CE	Yes
UL	UL E225616 Power conversion equipment
KC	Yes

Motor power

Specified on nameplate	2.2 kW (3 HP)

Mains connection

Mains input voltage	3x 380 VAC -15% to 500 VAC +10%
Frequency	50 to 60 Hz ±5%
Apparent power (at 500 VAC)	5.7 kVA
Max. assumed short-circuit current (Isc) (short-circuit current at connection point)	5 kA
Inrush current	Max. 10 A
Mains current
At 380 VAC	8.7 A
At 500 VAC	6.6 A
Power dissipation at nominal load and nominal clock frequency	78 W
Integrated EMC filter	Yes

Line-conducted and radiated emissions

With integrated filter
Motor cable length per IEC/EN 61800-3 Cat. C1 environment 1 (public power network)	–
Motor cable length per IEC/EN 61800-3 Cat. C2 environment 1 (public power network)	C2 level of 4 to 12 kHz with 5 m cable
Motor cable length per IEC/EN 61800-3 Cat. C3 environment 2 (industrial power system)	5 m
With add-on filter	8I0FT015.200-1
With add-on filter
Motor cable length per IEC/EN 61800-3 Cat. C1 environment 1 (public power network)	C1 level of 2 to 16 kHz with 20 m cable
Motor cable length per IEC/EN 61800-3 Cat. C2 environment 1 (public power network)	C2 level of 2 to 16 kHz with 50 m cable
Motor cable length per IEC/EN 61800-3 Cat. C3 environment 2 (industrial power system)	50 m

Motor connection

Nominal output current	5.5 A
Derating of continuous output current depending on ambient temperature
At nominal clock frequency (4 kHz)	No derating (up to 50°C)
Other clock frequencies	The derating curves are included in the installation instructions, which can be downloaded from www.br-automation.com.
Derating of continuous output current depending on installation elevation
Starting at 1000 m above sea level	1%, per 100 m
Max. transient current for 60 s	8.3 A
Max. transient current for 2 s	9 A
Output frequency range	0.1 to 599 Hz
Nominal clock frequency	4 kHz
Clock frequency
Min.	2 kHz
Max.	16 kHz
Braking torque
With braking resistor	Up to 170% of the nominal motor torque
Max. motor cable length
Shielded cable	50 m
Non-shielded cable	100 m
Motor control profiles
Induction motor	Sensorless vector control: 1. With V/f characteristic curve for constant torque → Default profile 2. With V/f characteristic curve for quadratically increasing torque → Energy-saving profile, e.g. for fans and pumps Sensorless slip control: 1. With V/f characteristic curve for constant torque → Default profile 2. With V/f characteristic curve for constant torque (6 f ranges) → Profile for individual special applications 3. With V/f characteristic curve for quadratically increasing torque → Energy-saving profile, e.g. for fans and pumps
Synchronous motor	Sensorless vector control: 1. With V/f characteristic curve for constant torque → Default profile
Main protective functions of inverter	Thermal protection against power stage overheating Protection against short circuits between motor phases, overcurrent between output phases and ground, overvoltages on the DC bus, exceeding the speed limit. Safety function for: Overvoltage and undervoltage of the mains supply, mains phase failure with 3-phase power supply

Brake chopper

Integrated dynamic brake transistors	Yes
Min. resistance value (external)	54 Ω

24 VDC power supply

Input voltage	24 VDC (-15%/+20%)
Current	Max. 1.1 A

Available internal power supplies

Output voltage 24 VDC	24 VDC (-15%/+20%)
Output voltage 24 VDC
Max. output current at 24 VDC	100 mA
Output voltage 10 VDC	10 VDC (-0%/+10%)
Output voltage 10 VDC
Max. output current at 10 VDC	10 mA

Interfaces

POWERLINK
Type	Type 2

Digital inputs

Quantity	6
Nominal voltage	24 VDC (max. 30 V)
Input circuit	Source or sink
Input circuit
Current consumption	7 mA
Electrical isolation
Input – ACOPOSinverter	Yes
Input – Input	No
Sampling time	8 ms ±0.7 ms
Input impedance	3.5 kΩ
Digital input 5
Max. input frequency	20 kHz

Safe input – STO (Safe Torque Off)

Quantity	1
Nominal voltage	24 VDC
Input impedance	1.5 kΩ
Input impedance
Current consumption	16 mA
Switching threshold
Low	<2 V
High	>17 V
Electrical isolation
Input – ACOPOSinverter	Yes
Input – Input	No
Input circuit	Sink
Sampling time	4 ms

Analog inputs

Quantity	3
Electrical isolation
Input – Input	No
Input – ACOPOSinverter	Yes
Input
Voltage	0 to 10 V, ±10 V
Current	0 to 20 mA (or 4 to 20 mA)
Resolution	10-bit
Sampling time	2 ms
Input impedance
Voltage	30 kΩ
Current	250 Ω

Digital outputs

Quantity	1
Nominal voltage	24 VDC
Max. voltage	30 VDC
Output circuit	Source or sink
Sampling time	2 ms
Max. current	100 mA

Relay outputs

Quantity	2
Nominal voltage	30 VDC / 250 VAC
Switching capacity	R1, with resistive load (cos phi = 1): 3 A at 250 VAC, R1, with resistive load (cos phi = 1): 4 A at 30 VDC, R1, R2, with inductive load (cos = 0.4 and L/R = 7 ms): 2 A at 250 VAC, R1, R2, with inductive load (cos = 0.4 and L/R = 7 ms): 2 A at 30 VDC, R2 with resistive load (cos phi = 1): 5 A at 250 VAC, R2 with resistive load (cos phi = 1): 5 A at 30 VDC
Variant
Relay 1	1 changeover contact
Relay 2	1 normally open contact
Electrical isolation
Output – ACOPOSinverter	Yes
Output – Output	No
Response time (max.)	2 ms

Analog outputs

Quantity	1
Output	0 to 10 V or 0 to 20 mA
Electrical isolation
Output – ACOPOSinverter	Yes
Output – Output	No
Max. load impedance
Voltage	470 Ω
Current	800 Ω
Update time	2 ms
Resolution	10-bit

Operating conditions

Degree of protection per EN 60529	IP20
Relative humidity per IEC 60068-2-3	5 to 95%. non-condensing No dripping water
Maximum installation elevation	Up to 2000 m
Max. pollution degree per IEC/EN 61800-5-1	2 (non-conductive pollution)
Ambient conditions per IEC 60721-3-3	Class 3C3 and 3S3
Operating position	Vertical mounting orientation ±10%

Ambient conditions

Temperature
Operation	-10 to 50°C without derating 50 to 60°C with derating
Storage	-25 to 70°C
Max. vibration resistance	1 g_n 13 to 200 Hz EN/IEC 60068-2-6 1.5 mm peak to peak 3 to 13 Hz EN/IEC 60068-2-6

For revision information, see the following model numbers:
8I74T400220.010-1
8I0IF108.400-1

Somos Wartung Automation, Lider en equipamientos, repuestos y service B&R para la automatizacion en Argentina hace 23 anos.

Hacemos service, backup , reparaciones de equipos B&R en Argentina.

Consulte su presupuesto.

Información adicional

Peso	4 kg

Productos