Productos
X20D08332, B&R, PLC, X20, Modulo de salida Digital 8 digital outputs con 2 A, X20DO8332
B&R SYSTEM DIGITAL INPUT MODULE X20, Representante.
Description
DESCRIPCIÓN: X20DO8332
8 salidas digitales con 2 A
Conexión de origen
Conexiones de 1 hilo
Alimentación eléctrica integrada en el módulo
Protección de salida integrada
El módulo está equipado con 8 salidas para conexiones de 1 hilo. La corriente nominal de salida es de 2 A.
El suministro de salida se alimenta directamente al módulo. No se necesita un módulo de alimentación adicional. No hay conexión entre el módulo y el potencial de alimentación de E/S en el módulo de bus.
Short description
| I/O module | 8 digital outputs 24 VDC for 1-wire connections |
General information
| B&R ID code | 0x1B9D |
| Status indicators | I/O function per channel, operating state, module status |
| Diagnostics | |
| Module run/error | Yes, using LED status indicator and software |
| Outputs | Yes, using LED status indicator and software (output error status) |
| Supply voltage monitoring | Yes, using software |
| Power consumption | |
| Bus | 0.22 W |
| Internal I/O | – |
| External I/O | 0.92 W |
| Additional power dissipation caused by actuators (resistive) [W] | +2.24 |
| Certifications | |
| CE | Yes |
| UKCA | Yes |
| ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user’s manual) FTZÚ 09 ATEX 0083X |
| UL | cULus E115267 Industrial control equipment |
| HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| DNV | Temperature: B(0 – 55°C) Humidity: B(up to 100%) Vibration: B(4 g) EMC: B(bridge and open deck) |
| LR | ENV1 |
| KR | Yes |
| ABS | Yes |
| BV | EC33B Temperature: 5 – 55°C Vibration: 4 g EMC: Bridge and open deck |
| EAC | Yes |
| KC | Yes |
Digital outputs
| Variant | Current-sourcing FET |
| Number of output groups | 2 |
| Nominal voltage | 24 VDC |
| Switching voltage | 24 VDC -15% / +20% |
| Nominal output current | 2 A |
| Total nominal current | |
| Per group | 4 A |
| Per module | 8 A |
| Connection type | 1-wire connections |
| Output circuit | Source |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit (see value «Short-circuit peak current») Internal freewheeling diode for switching inductive loads (see section «Switching inductive loads») Reverse polarity protection of supply voltage |
| Actuator power supply | |
| Supply | External |
| Fuse | Required line fuse: Max. 10 A, slow-blow |
| Diagnostic status | Output monitoring with 10 ms delay |
| Leakage current when the output is switched off | 5 µA |
| RDS(on) | 140 mΩ |
| Peak short-circuit current | <12 A |
| Switch-on in the event of overload shutdown or short-circuit shutdown | Approx. 10 ms (depends on the module temperature) |
| Switching delay | |
| 0 → 1 | <300 µs |
| 1 → 0 | <300 µs |
| Switching frequency | |
| Resistive load | Max. 500 Hz |
| Inductive load | See section «Switching inductive loads». |
| Braking voltage when switching off inductive loads | Typ. 50 VDC |
| Insulation voltage between channel and bus | 500 Veff |
| Additional functions | Outputs can be connected in parallel to increase the output current. |
Electrical properties
| Electrical isolation | Channel isolated from bus and I/O power supply |
Operating conditions
| Mounting orientation | |
| Horizontal | Yes |
| Vertical | Yes |
| Installation elevation above sea level | |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature | |
| Operation | |
| Horizontal mounting orientation | -25 to 60°C |
| Vertical mounting orientation | -25 to 50°C |
| Derating | See section «Derating». |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Relative humidity | |
| Operation | 5 to 95%, non-condensing |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
Mechanical properties
| Note | Order 1x terminal block X20TB12 separately. Order 1x bus module X20BM11 separately. |
| Pitch | 12.5+0.2mm |
MANDATORY ACCESSORIES
Bus modules
| X20BM11 | X20 bus module, 24 VDC keyed, internal I/O power supply connected through |
| X20BM15 | X20 bus module, with node number switch, 24 VDC keyed, internal I/O power supply connected through |
Terminal blocks
| X20TB12 | X20 terminal block, 12-pin, 24 VDC keyed |
Distribuidores B&R Industrial Automation Argentina, Service Provider.
Somos Wartung Automation, Lider en equipamientos, repuestos y service para la automatizacion en Argentina hace 23 anos.
Distribuidores B&R Argentina, PLC, Service, HMi Pantallas, Drives Amplificadores B&R, reparaciones, ventas, repuestos, proveedor.
Mas informacion?
Additional information
| Weight | 0,2 kg |
|---|
