Productos
MSMF152L1G5, Panasonic, Servo Motor, MINAS A6, 1,5kW, baja inercia, 4,77Nm, 3000rpm, clase 200V, eje chavetero, aceite
11 de marzo de 2024
VPL-B1153F-PJ12AA, Allen Bradley, Servomotor, giratorio, 480 V, marco de 115 mm, 4500 RPM, baja inercia.
12 de marzo de 2024
MDDLT55SF, Panasonic, Amplificador, A6SF, Minas Monofásico/Trifásico 200 a 240V +10% -15% 50/60 Hz, Potencia de entrada, Monofásico 200 a 240V +10% -15% 50/60 Hz. Codificador
Description
Basic Specifications
Input power: Main circuit Single/3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz
Input power: Control circuit Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz
Encoder feedback 23-bit (8388608 resolution) absolute encoder, 7-wire serial
About Encoder feedback * When using it as an incremental system (not using multi-turn data), do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to «1» (factory settings).
External scale feedback A/B phase, homing signal differential input. ”A communication protocol developed for Servo Motor encoders of Panasonic Industry Co., Ltd.” is also supported.
Parallel I/O connector:
Control signal Input General purpose 10 inputs
The function of general-purpose input is selected by parameters.
Parallel I/O connector:
Control signal Output General purpose 6 output
The function of general-purpose output is selected by parameters.
Parallel I/O connector:
Analog signal Input 3 inputs (16-bit A/D : 1 input, 12-bit A/D : 2 inputs)
Parallel I/O connector:
Analog signal Output 2 outputs (Analog monitor: 2 output)
Parallel I/O connector:
Pulse signal Input 2 inputs (Photo-coupler input, Line receiver input)
Both open collector and line driver interface can be connected.
High speed line driver interface can be connected.
Parallel I/O connector:
Pulse signal Output 4 outputs (Line driver: 3 output, open collector: 1 output)
Line driver output for encoder pulses (A/B/Z signal) or external feedback pulses (EXA/EXB/EXZ signal) open collector output also available for Z or EXZ signal.
Communication function USB, RS232, RS485, Modbus-RTU
Communication function: USB USB interface to connect to computers for parameter setting or status monitoring.
Communication function: RS232 1:1 communication
Communication function: RS485 1: n communication (max 31)
Communication function: Modbus-RTU 1: n communication
Regeneration Built-in regenerative resistor (external resistor is also enabled.)
Control mode Switching among the following 7 mode is enabled,
Panasonic Servo Motor Service, Argentina
Mas Información?
