Productos
MCR-SL-UI-2I-NC, PHOENIX CONTACT, 4-way signal duplicator for electrical isolation and duplication of analog signals with screw connection, standard configuration
MCR feed-in terminal for supplying several MINI Analog modules via a DIN rail connector
For more information and download >> 0900766b81715014
Product desciption:
The 6.2 mm wide configurable 4-way isolating amplifier MINI MCR-SL-UI-2I-… is used for electrical isolation, conversion, amplification and filtering of standard signals.
On the input side, the analog standard signals 0…20 mA, 4…20 mA, 0…10 V or 1…5V can be selected, on the output side there are two current outputs that can be set independently of one another with a 0…20 mA-, or 4…20mA signal, electrically isolated (4-way isolation).
The DIP switches, which can be accessed on the side of the housing, can be used to configure the input and output signal ranges.
Power (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector.
| Product type | Signal duplicator |
| Product family | MINI Analog |
| No. of channels | 2 |
| Configuration | DIP switches |
| Insulation characteristics | |
| Overvoltage category | II |
| Pollution degree | 2 |
Electrical data.
| No. of channels | 2 |
| Rated insulation voltage | 50 V AC/DC |
| Electrical isolation | Basic insulation in accordance with EN 61010 |
| Electrical isolation between input and output | yes |
| Limit frequency (3 dB) | approx. 35 Hz |
| Maximum power dissipation for nominal condition | 500 mW |
| Test voltage (Input/output/supply) | 1.5 kV AC (50 Hz, 60 s) |
| Protective circuit | Transient protection |
| Step response (0–99%) | 10 ms |
| Maximum temperature coefficient | < 0.01 %/K |
| Temperature coefficient, typical | < 0.004 %/K |
| Maximum transmission error | ≤ 0.2 % (of final value) |
| Transmission error, typical | < 0.1 % |
| Supply | |
| Nominal supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC … 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715) |
| Max. current consumption | < 30 mA (at 24 V DC incl. load) |
| Power consumption | < 600 mW |
