DL100-11AA2110, SICK, Long range distance sensors. Dx100 / DL100

S

• Mechanics/electronics

  Supply voltage Vs	DC 18 V … 30 V, limit values
  Ripple	5 Vpp 1)
  Initialization time	Typ. 1.5 s 2)
  Housing material	Metal (Aluminum die cast)
  Window material	Plastic (PMMA)
  Connection type	Male connector, M12, SPEEDCON™ compatible
  Indication	6 digit 5 x 7 dot matrix display, LEDs
  Weight	Approx. 800 g (with mounting bracket: approx. 1,600 g)
  Current consumption	At 24 V DC < 250 mA
  Dimensions (W x H x D)	69.4 mm x 82.5 mm x 100.2 mm
  Modulation frequency	Fix
  Enclosure rating	IP65
  Protection class	III

  • ¹⁾ May not fall short of or exceed V_S tolerances.
  • ²⁾ After loss of reflector < 40 ms.

• Performance

  Measuring range	0.15 m … 60 m, on “diamond grade” reflective tape
  Target	Reflector
  Resolution	0.1 mm, 0.125 mm, 1 mm, 10 mm, 100 mm
  Repeatability	1.5 mm, at dead time 10 ms 1) 0.75 mm, at dead time 30 ms 1)
  Accuracy	± 3 mm 2)
  Response time	2 ms
  Measurement cycle time	1 ms
  Output time	1 ms
  Light source	Laser, red 3) visible red light
  Laser class	2, complies with 21 CFR 1040.10 and 1040.11 except for the conformance according to “Laser Notice No. 50” from June 24, 2007 (IEC 60825-1:2014, EN 60825-1:2014)
  Typ. light spot size (distance)	5 mm + (2 mm x distance in m)
  Max. movement speed	10 m/s

  • ¹⁾ Statistical error 1 σ, environmental conditions constant, depending on operating mode.
  • ²⁾ From 150 mm … 180 mm measuring range the accuracy can reach ± 4 mm.
  • ³⁾ Average service life: 100,000 h at T_U = +25 °C.

• Interfaces

  EtherNet/IP™ ✔
  Digital output Number 2 1) Type Push-pull: PNP/NPN Function Distance: Distance switching output Speed; Speed output Service: Warning message as the sensor ages, if the damping value is exceeded (for example when contaminated, if the permitted interior device temperature is exceeded or undercut, if the measured value has a plausibility error, if the laser is not ready for operation, if the heating is switched on Laser off Preset Maximum output current IA ≤ 100 mA 2)
  Multifunctional input (MF)	1 x MF1 3)

  • ¹⁾ HIGH = > V_S – 3 V / LOW = < 2 V.
  • ²⁾ Max. 100 nF/20 mH.
  • ³⁾ HIGH > 12 V / LOW < 3 V.

• Ambient data
  • Classifications

Descontinuado su Successors

Here you can find alternative products: