Productos
ATM60-PAH13X13, SICK, Encoder absoluto, serie ATM60 PROFIBUS, 8192 impulsos/rev, 3000rpm máx., con Otro, 10 → 32 V., IP66
Description
Descripción:
CODIFICADOR ABSOLUTO, SERIE ATM60 PROFIBUS, IMPULSOS POR REVOLUCIÓN: 8192, 3000 RPM, 10-32 V, DIÁMETRO DEL EJE: 15 MM, RESOLUCIÓN: 8192PASOS, TIPO DE MONTAJE DE EJE HUECO, IP66
Encodificador de múltiples múltiple extremadamente resistente, probado y probado con una resolución de hasta 26 bits
Interfaz mecánica: brida de montaje en la cara, brida de servo, eje hueco ciego y amplios accesorios de adaptadores
Funciones preestablecidas y preestablecidas a través de hardware o software
No se requiere batería
Interfaz eléctrica: Profibus DP según IEC61158 / RS 485, aislado eléctricamente
Resolución configurable y ajustable electrónicamente
Exploración magnética
Performance
| Max. number of steps per revolution: | 8,192 |
| Max. number of revolutions: | 8,192 |
| Resolution power: | 8,192 x 8,192 |
| Resolution: | 13 bit x 13 bit |
| Error limits: | ± 0.25 ° |
| Repeat accuracy: | 0.1 ° |
| Measuring step: | 0.043 ° |
| Initialization time: | 1,250 ms 1) |
| 1) Valid positional data can be read once this time has elapsed | |
| Mechanical data | |
| Mechanical interface: | Blind hollow shaft |
| Shaft diameter: | 6 mm 8 mm 10 mm 12 mm 14 mm 15 mm 1/4 » 3/8 » 1/2 » 1) |
| Mass: | 0.59 kg |
| Moment of inertia of the rotor: | 55 gcm² |
| Bearing lifetime: | 3.6 x 10^9 revolutions |
| Max. angular acceleration: | 500,000 rad/s² |
| Permissible movement axial static/dynamic: | ± 0.5 mm, ± 0.2 mm |
| Permissible movement radial static/dynamic: | ± 0.3 mm, ± 0.1 mm |
| Shaft material: | Stainless steel |
| Flange material: | Aluminum |
| Housing material: | Die-cast aluminum |
| Start up torque with shaft seal: | 1.2 Ncm |
| Operating torque with shaft seal: | 0.8 Ncm |
| 1) Collets for 6, 8, 10, 12, 14 mm and 1/4 «, 3/8 » and 1/2 » as accessories, separate order item. For 15 mm shaft diameter collet is not needed. | |
| Electrical data | |
| Operating voltage range: | 10 V … 32 V |
| Power consumption max.: | 2 W |
| MTTFd: mean time to dangerous failure: | 150 a (EN ISO 13849-1) 1) |
| Interfaces | |
| Electrical interface: | Bus adaptor with cable screw fixings or connector 1) |
| SET (electronic adjustment): | Via PRESET push button or protocol |
| Bus: | PROFIBUS DP |
| Bus interface: | RS-485 2) 3) 4) |
| Data protocol: | Profile for encoders (07hex) – Class 2 |
| Address setting: | 0 … 127, DIP-switches or protocol |
| Data transmission rate (baud rate): | 9.6 kBaud / 12 MBaud / automatic detection |
| Status information: | LED green (operation), LED red ( bus activity) |
| Bus termination: | DIP switch |
Mas información?
Additional information
| Weight | 0,59 kg |
|---|---|
| Dimensions | 8,3 × 6,3 × 5,9 cm |
