Productos
750-517, Wago, 2-channel relay output; AC 250 V; 1 A; Potential-free; 2 changeover contacts
Description
Este módulo de salida digital transmite señales de control desde el dispositivo de automatización a los actuadores conectados.
La tensión interna del sistema activa el relé.
Los contactos NA están aislados galvánicamente.
El estado del relé se indica mediante un LED.
Global (ES)
Technical data
| Number of digital outputs | 2 |
| Total number of channels (module) | 2 |
| Signal type | Digital |
| Actuator connection | 2 x (1-wire) |
| Output circuit design | 2 changeover contacts Relay |
| Output characteristic | potential-free |
| Switching frequency (max.) | 0.1 Hz; Nominal load |
| Switching voltage (max.) | 250 VAC, 300 VDC |
| Switching current (max.) | 1A |
| Switching current (note) | 1 A at 250 VAC and 40 VDC; 0.15 A at 300 VDC |
| Switching voltage (min.) | 12V |
| Switching current (min.) | 100mA |
| Pull-in time (max.) | 8ms |
| Drop-out time (max.) | 4ms |
| Electrical switching operations (min.) (at max. resistive load) | 1 x 10⁶ switching operations |
| Mechanical switching operations (min.) (at max. resistive load) | 5 x 10⁶ switching operations |
| Output data width (internal) max. | 2Bit |
| Supply voltage (system) | 5 VDC; via data contacts |
| Current consumption (5 V system supply) | 90mA |
| Isolation | 1500 V (system/field) |
| Indicators | LED (A, E) green: Status relay 1, relay 2 |
Mas informacion? contáctenos, ¡Estaremos encantados de ayudarle!
Additional information
| Weight | 0,110 kg |
|---|---|
| Dimensions | 6,78 × 1,2 × 10,4 cm |
